Oct 15, Keep the jack under the rear end. Do one end of a single spring at a time, removing the bolt securing the spring into the front pocket and/or the leaf spring and frame bolts on the rear shackle as required. This keeps the rear end properly located. 3. Remove the bolt and lower the jack completely to perform the repair described bushfall.buzzg: Concord MA. Aug 29, Thanks to N2O_ZR2 on ZR2USA for the part number for the leaf spring bushing kit for our trucks.
without his help, it would have taken me a bit longer to find the correct kit (had conflicting info on leaf bushing size) I did a quick video on replacing the leaf spring bushings Estimated Reading Time: 2 mins. The best way to remove these bushings is to use a torch and set the rubber on fire. Let it burn one to two minutes then hit the eye so the rubber and the inner sleeve falls out.
Then use a punch and a hammer and catch the end of the outer sleeve and curl it bushfall.buzzted Reading Time: 1 min. Replacing leaf spring bushings on your vehicle can be a big job, but if you have the right tools, a little patience, and time, you can do it in a weekend. Leaf spring bushings serve to isolate the vehicle from road vibration and bumps in the road.
Replacement bushings can be made of rubber or urethane and are Missing: Concord MA. Feb 26, a box of FOUR spring bushings for the rear eye of the front leaf springs on both old dodges.
I did the Town Wagon over the weekend, and I found the right rear bushing was just about totally destroyed. This box of bushings were from ESPO Springs and Things, five bucks each for the two piece bushfall.buzzg: Concord MA. Jan 01, I have been searching for days trying to find Del-A-Lum or Delrin leaf springs bushings for my 2wd S pickup.
Does anyone have a link to a site that sells these? Thanks for your bushfall.buzzg: Concord MA.